
K-Wires & Steinmann Pins
Steinmann Pins
Steinmann Pins by ZHONGJIAN TECH: precision-manufactured smooth and threaded fixation pins in diameters 2.0–4.8 mm, with trocar and diamond points and plain or three-side shanks, for larger-bone and long-bone fixation.
Specifications
- Diameter
- 2.0, 2.4, 2.8, 3.2, 3.6, 4.0, 4.8 mm (5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 in)
- Length
- 4 in (102 mm), 6 in (152 mm), 9 in (229 mm), 12 in (305 mm)
- Point Styles
- Double Trocar; Trocar One End + Three Side Shank; Diamond One End + Three Side Shank; Trocar One End + Plain End; Diamond One End + Plain End; Double Diamond; Diamond + Trocar
- Thread
- NT Smooth; ST Short Partially Threaded; FT Full Threaded
- Options
- Add R for Round End; S for Sterile
- Part Number Pattern
- SQ-[diameter][point][length][NT/ST/FT]; examples SQ-20104NT, SQ-48112FT
Who it is for and where it is used
Steinmann pins are stouter fixation pins used by orthopaedic and trauma surgeons whenever a larger bone or a larger fragment needs to be held in place while it heals. ZHONGJIANTECHTech supplies these pins to hospitals, surgical centres and distributors that serve operating theatres where long-bone and larger-fragment fixation is part of everyday practice. In the lower limb they are used for fractures of the tibia and femur, for the fixation of larger fragments around the knee and ankle, and for the temporary stabilisation of joints after dislocation or ligament repair. In the upper limb they support the fixation of the humerus and of larger forearm fragments. They are also used as skeletal traction pins, passed through bone so that traction can be applied while a fracture is held in alignment, and as guide pins and temporary pins during larger procedures, holding fragments or instruments in position until a definitive implant is placed. In veterinary surgery the same pins are used for the fixation of larger animal fractures, where their extra diameter gives the stiffness that small wires cannot provide. Because the range covers seven diameters and four lengths, a theatre can keep one family of pins on the shelf for a wide spread of cases, from small adult fragments to the long bones of large patients, instead of stocking many different fixation systems.
Construction and specifications
ZHONGJIAN TECH Steinmann pins are precision-manufactured and are supplied straight, with a clean, uniform surface along the full length of the pin so that they pass smoothly through a drill guide and through bone. Each pin is identified by its diameter, its point style, its length and its thread pattern, so the right pin can be picked without ambiguity at the sterile field. Diameters are 2.0, 2.4, 2.8, 3.2, 3.6, 4.0 and 4.8 mm (5/64, 3/32, 7/64, 1/8, 9/64, 5/32 and 3/16 in). Lengths are 4 in (102 mm), 6 in (152 mm), 9 in (229 mm) and 12 in (305 mm). Point styles are Double Trocar, Trocar One End + Three Side Shank, Diamond One End + Three Side Shank, Trocar One End + Plain End, Diamond One End + Plain End, Double Diamond, and Diamond + Trocar. The three-side shank gives a firm grip for a chuck or drill, while the plain end suits hand placement and later removal. The trocar point cuts cleanly on entry, while the diamond point gives a sharp, centred tip for precise placement. Thread options are NT for Smooth, ST for Short Partially Threaded, and FT for Full Threaded. The threaded versions resist backing out and hold their position in bone, while the smooth versions are suited to temporary fixation, traction and easy removal. A round end can be specified by adding R, and a sterile packed version by adding S. Part numbers follow the pattern SQ-[diameter][point][length][NT/ST/FT]; for example, SQ-20104NT is a 2.0 mm smooth pin, 4 in long, with a Double Trocar point (point code 1), and SQ-48112FT is a 4.8 mm fully threaded pin, 12 in long, with a Double Trocar point (point code 1).

How to order
To order, build the part number from the four elements in the pattern SQ-[diameter][point][length][NT/ST/FT] and add R for a round end or S for sterile packing where required. First choose the diameter that matches the bone and the drill guide: 2.0 and 2.4 mm for smaller fragments, 2.8, 3.2 and 3.6 mm for general work, and 4.0 and 4.8 mm where a stiffer pin is wanted, including traction use. Then choose the point style that suits the entry and the bone, noting whether a three-side shank or a plain end is wanted at the trailing end, then the length that leaves enough pin outside the skin for handling, traction and later removal, and finally the thread pattern: NT smooth for temporary fixation and traction, ST short partially threaded where some grip is needed near the tip, or FT full threaded where the pin must stay in place. Quote the complete part number, for example SQ-20104NT or SQ-48112FT, when placing an order with ZHONGJIAN TECH, and state the quantity required. Pins are supplied in the lengths and diameters listed above, so please order from the published range and check the part number against the diameter, point, length and thread tables before confirming.
