Who it is for and where it is used
Large bone reciprocating saw blades are the cutting blades used with a reciprocating saw handpiece in large-bone orthopaedic surgery. ZHONGJIAN TECH supplies them to hospitals, surgical centres and distributors that serve operating theatres where large-bone cutting is part of everyday practice. They are used in joint replacement surgery, where a straight cut prepares the bone for an implant, in fracture surgery, where a large fragment has to be shaped or trimmed, and in revision work, where an earlier implant has to be removed and the bone re-cut. They are also used in spinal work and in veterinary orthopaedics for the same range of large-bone cutting tasks in animal bone. The reciprocating motion, a straight back-and-forth stroke along the length of the blade, cuts in a line and gives the surgeon a narrow, controlled cut, which is what a straight implant seat or a narrow bone cut needs. The range covers lengths from 38.0 to 88.0 mm and widths from 6.3 to 12.8 mm, so one family of blades can serve a wide spread of procedures, from short, narrow cuts in smaller bones to long cuts across a large bone, instead of many separate blade systems.
Construction and specifications
ZHONGJIAN TECH large bone reciprocating saw blades are precision-manufactured with a toothed cutting edge that stays sharp through a cut and with a flat, even blade body that runs true in the saw handpiece. Each blade is identified by its prefix, its length, its width, its material thickness and its cut thickness, so the right blade can be picked without ambiguity at the sterile field. Lengths run from 38.0 to 88.0 mm and widths from 6.3 to 12.8 mm. Material thickness runs from 0.38 to 1.27 mm and cut thickness, the width of the slot the blade leaves in the bone, runs from 0.53 to 1.78 mm. Prefixes are BC, AC and BA. The coupling code in the prefix is C, ConMed Linvatec Large Bone Reciprocating, for the BC and AC prefixes, and A, Stryker Large Bone Reciprocating, for the BA prefix. Tooth types A to F are available; the catalog does not publish a tooth-pitch table, so please confirm the tooth type required when ordering. Examples from the range are BC09038064, 38.0 x 9.4 mm with a cut thickness of 0.64 mm; AC13069097, 69.0 x 12.7 mm with a cut thickness of 0.97 mm; and BC12088178, 88.0 x 12.2 mm with a material thickness of 1.27 mm and a cut thickness of 1.78 mm.
Part-number matrix — by tooth type
| Tooth type | Part number | Length (L) | Width (W) | Thickness | Cut |
| A | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| B | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| C | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| D | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| E | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
| F | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering | Confirm before ordering |
Family size range
| Length (L) | Width (W) | Thickness | Cut |
| 38–88 mm | Confirm before ordering | Confirm before ordering | 0.53–1.78 mm |
Coupling codes: A–W (16 codes; there is no code L, Y, or Z). The catalog publishes no tooth-pitch table and no per-tooth-type part-number list for this family.
Example: reciprocating blades cut on the back-and-forth stroke; confirm the exact part number and tooth type before ordering.
How to order
To order, quote the complete part number from the range, for example BC09038064, AC13069097 or BC12088178. First choose the length that reaches the cutting depth with enough blade outside the bone for handling. Then choose the width that suits the cut: narrower blades for tight or short cuts and wider blades for longer, straighter cuts. Then check the material thickness and the cut thickness, since the cut thickness sets the width of the slot left in the bone, and confirm the tooth type required, from types A to F. Then confirm the coupling: C, ConMed Linvatec Large Bone Reciprocating, for the BC and AC prefixes, or A, Stryker Large Bone Reciprocating, for the BA prefix. Quote the complete part number when placing an order with ZHONGJIAN TECH, and state the quantity required. Blades are supplied in the lengths, widths, material thicknesses and cut thicknesses listed above, so please order from the published range and check the part number against the length, width, material thickness and cut thickness tables before confirming.