Who it is for and where it is used
Cannulated drills with an AO quick connect coupling are bone drills made to pass over a guide wire. ZHONGJIAN TECH supplies them to hospitals, surgical centres and distributors that serve operating theatres where a drill must follow a wire that is already in place. They are used in fracture surgery to prepare pilot holes over a guide wire for cannulated screws, in hand and foot surgery where small diameters suit small bones, and in long-bone work where larger diameters prepare the way for bigger implants. They are also used in joint replacement and revision work, in spinal work where a pilot hole is needed before a screw is placed, and in veterinary orthopaedics for the same range of drilling tasks in animal bone. Because the drill is hollow along its length, the guide wire holds its line while the drill advances, which helps the surgeon keep the planned direction and position. Because the coupling locks straight into a powered surgical drill or handpiece, theatre teams can change drills in seconds without a chuck key, which keeps the workflow moving during a case. The range covers seventeen diameters from 1.5 to 6.5 mm and overall lengths from 80 to 350 mm, so one family of drills can serve a wide spread of procedures instead of many separate drill systems.
Construction and specifications
ZHONGJIAN TECH cannulated drills are precision-manufactured with a helical flute that carries bone chips away from the cutting tip as the drill advances, and with a sharp cutting point that starts on the bone surface without wandering. The hollow centre, the cannulation, runs along the length of the drill and is sized to pass over a guide wire. Cannulation is available in the range 0.8 to 2.5 mm; please confirm the guide-wire size required when ordering, so the matching cannulation can be supplied. Each drill is identified by its diameter and its overall length, so the right drill can be picked without ambiguity at the sterile field. Diameters are 1.5, 1.8, 2.0, 2.5, 2.7, 3.0, 3.2, 3.5, 3.8, 4.0, 4.2, 4.5, 4.8, 5.0, 5.5, 6.0 and 6.5 mm. Overall lengths run from 80 to 350 mm. Maximum overall length varies by diameter: drills of 1.5 to 2.0 mm go up to 200 mm in overall length, drills of 2.5 and 2.7 mm go up to 350 mm, and drills of 3.5 mm and above start at 100 mm in overall length. The effective length, the working length available for drilling, is the overall length less 25 mm, so effective lengths run from 55 to 325 mm; the 25 mm difference is taken up by the shank and coupling end of the drill. The coupling is AO Quick Connect, which snaps into AO-compatible powered drills and handpieces and releases just as quickly when the drill is changed. Part numbers follow the pattern CAO[diameter x10][overall length]; for example, CAO15080 is a 1.5 mm drill, 80 mm overall, CAO27140 is a 2.7 mm drill, 140 mm overall, and CAO65350 is a 6.5 mm drill, 350 mm overall.
Part-number matrix — overall length (mm)
| Diameter (mm) | Cannulation (mm) | 100 mm | 350 mm |
| 2.5 | 0.8 | CAO250100 | CAO250350 |
| 2.7 | 0.8 | CAO270100 | CAO270350 |
| 3.0 | 1.0 | CAO300100 | CAO300350 |
| 3.2 | 1.0 | CAO320100 | CAO320350 |
| 3.5 | 1.1 | CAO350100 | CAO350350 |
| 3.8 | 1.3 | CAO380100 | CAO380350 |
| 4.0 | 1.3 | CAO400100 | CAO400350 |
| 4.2 | 1.3 | CAO420100 | CAO420350 |
| 4.5 | 1.5 | CAO450100 | CAO450350 |
| 4.8 | 1.6 | CAO480100 | CAO480350 |
| 5.0 | 1.6 | CAO500100 | CAO500350 |
| 5.5 | 1.9 | CAO550100 | CAO550350 |
| 6.0 | 2.0 | CAO600100 | CAO600350 |
| 6.5 | 2.5 | CAO650100 | CAO650350 |
Effective length — Cannulated AO family (Effective = Overall − 25 mm)
| Overall length (mm) | Effective length (mm) |
| 100 | 75 |
| 350 | 325 |
Length limits by diameter: 2.5–2.7 mm go to 350 mm; 3.5 mm and above start at 100 mm. Only the lengths shown are tabulated for this family.
Coupling: CAO — AO Quick Connect Coupling. Other couplings in the catalog (not separate CMS products): Jacob Quick (JA), 1/4 SQ (SQ), Hudson (HU), Mini AO (MN) — Confirm before ordering. Sterile: add S to the part number.
Example: CAO250100 = 2.5 mm, 0.8 mm cannulation, 100 mm overall; CAO650350 = 6.5 mm, 2.5 mm cannulation, 350 mm overall.
How to order
To order, build the part number from the pattern CAO[diameter x10][overall length]. First choose the diameter that matches the screw or implant that will follow the drill: 1.5 and 1.8 mm for the smallest pilot holes, 2.0 to 3.2 mm for general hand, foot and small-bone work, and 3.5 to 6.5 mm for larger screws and long-bone work. Then choose the overall length that reaches the drilling depth with enough drill outside the bone for handling, remembering that the effective length is 25 mm shorter than the overall length. Then confirm the cannulation: the range is 0.8 to 2.5 mm, so please state the guide-wire size required when ordering. Then confirm the coupling: AO Quick Connect is the coupling for this product. Quote the complete part number, for example CAO15080, CAO27140 or CAO65350, when placing an order with ZHONGJIAN TECH, and state the quantity required. Drills are supplied in the diameters and overall lengths listed above, so please order from the published range and check the part number against the diameter and length tables before confirming.